Flame hardening molds
For mold work where local surface hardening is required.
Cold Work Tool Steel
HMD5 Flame-Hardening Cold Work Die Steel Supplier
HMD5 is supplied as a flame-hardening cold work die steel for mold, die and tooling applications where buyers need practical toughness, local surface hardening and cut-to-size supply from China. It is commonly referenced with GB 7CrSiMnMoV / CH-1 under GB/T 1299.
HMD5 / 7CrSiMnMoV / CH-1
Flame-Hardening Cold Work Steel
Cutting & Export Support
MTC Available
Equivalent Grades
HMD5 Equivalent Grades
Use these names for inquiry preparation when comparing Chinese cold work die steel references.
| Common Name | Chinese Grade | Alternative Name | Standard / Reference | Product Family |
|---|---|---|---|---|
| HMD5 | 7CrSiMnMoV | CH-1 | GB/T 1299 | Cold Work Tool Steel |
Equivalent names are for purchasing reference. Final supply should be confirmed by chemical composition, delivery condition, MTC and order requirements.
Chemical Composition
HMD5 / 7CrSiMnMoV / CH-1 Chemical Composition
Typical HMD5 reference composition and Chinese 7CrSiMnMoV standard range are listed below for purchasing reference. Final chemical composition should be confirmed by the agreed supply standard, delivery condition and material test certificate.
| Element | HMD5 Typical % | 7CrSiMnMoV GB/T 1299 Range % |
|---|---|---|
| C | 0.70 | 0.65–0.75 |
| Si | 1.00 | 0.85–1.15 |
| Mn | 1.00 | 0.65–1.05 |
| P | — | ≤0.030 |
| S | — | ≤0.015 |
| Cr | 1.20 | 0.90–1.20 |
| Mo | 0.20 | 0.20–0.50 |
| V | — | 0.15–0.30 |
| Cu | — | ≤0.25 |
| Cu + Ni | — | ≤0.55 |
HMD5 is commonly referenced in China together with 7CrSiMnMoV / CH-1. Equivalent names are for purchasing reference only. Final supply should be confirmed according to chemical composition, delivery condition, order standard and MTC.
Applications
Typical Applications
HMD5 is selected where practical toughness, local surface hardening and tooling repairability are important.
Cold work dies
For forming, stamping or tooling applications by drawing.
Wear-resistant tooling parts
For components that need toughness plus surface wear resistance.
Large mold components
For blocks requiring localized surface hardening after machining.
Repairable tooling
For applications where practical toughness and repairability matter.
Supply & Processing
Supply Form & Processing Support
Send your size list and delivery condition so Haoyuan can check stock route, processing scope and export packing plan.
- Plates
- Blocks
- Flat bars
- Cut-to-size pieces
- Saw cutting
- Milling and grinding support
- Heat treatment coordination
- Steel marking, packing and export documents
Buyer Support
Why Buy HMD5 from Haoyuan Special Steel
We help overseas mold, die and tooling buyers confirm the practical supply details before order.
Ready stock and mill-order route
Check existing stock first, then confirm mill-order possibility when needed.
Cutting and processing support
Coordinate sawing, milling, grinding and related processing by inquiry.
MTC and traceability support
Prepare material certificate and traceability information according to supply route.
Export packing and shipping
Support marking, packing photos and shipment coordination for export orders.
Practical confirmation
Confirm grade, size, delivery condition, weight and lead time before quotation.
RFQ
Send Us Your HMD5 Size List
Send your required grade, size, quantity, delivery condition and destination port. We will help check stock route, processing cost, theoretical weight and estimated delivery time.